What is SenseCAP M1
SenseCAP M1 is a high-performing, ready-to-use LoRaWAN indoor gateway compatible with Helium LongFi Network. SenseCAP M1 can connect to The People’s Network within a few simple steps in minutes, and helps you build LoRa applications with low costs. SenseCAP M1 provides miles of wireless network coverage and data transmission capacity for LoRa/LoRaWAN devices. It helps you join and contribute to the infrastructure of The People’s Network while enjoying the benefits from the Helium community.
Features:
-
Handy Setup to Helium Network. 6 steps, 5 minutes, ready to go.
-
Powered by Mature Hardware Solutions. Raspberry Pi 4(2G/4G/8G RAM) and WM1302/WM1303 (Semtech SX1302/SX1303) baseband LoRa chip.
-
Secured and Reliable. Built-in ECC608 crypto chip, high-security authentication, and reliable connectivity.
-
Automatic Online Upgrades. Automatic OTA upgrades, without manual operation.
-
Remote Diagnosis. Built-in remote diagnostics mechanism, efficient online support.
-
64GB Large Storage. 64GB MicroSD card large storage, extending the lifetime of the gateway, fulfilling the memory requirement of potential upgrade.
-
Efficient Cooling Solution. Aluminum enclosure with a heatsink and cooling fan inside, ensuring long-term and stable operation.
-
Multiple Accessories. Fiberglass antenna, slider pad for sliding rod installation, and upcoming outdoor enclosure, etc.
-
FCC and CE Certificated. Available for personal and commercial use.
SenseCAP M1 Orders are designated as Non-Cancellable/Non-Returnable (“NCNR”), except for the quality problems. You need to contact us to review the problem if you want to return.
Specifications
| Processor | Raspberry Pi 4 (Broadcom BCM2711, Quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz) |
| RAM | 8GB |
| Storage | 64GB MicroSD Card |
| Frequency | EU868 Version: 863MHz ~ 870MHz |
| Sensitivity | -125dBm @125KHz/SF7 |
| -139dBm @125KHz/SF12 | |
| TX Power | Up to 26 dBm |
| Antenna Gain | EU868: 2.8 dBi |
| Antenna Impedance | 50 Ohm |
| Antenna Radiation Pattern | Omni-Directional |
| Wi-Fi | 2.4 GHz and 5.0 GHz IEEE 802.11ac wireless |
| Bluetooth | Bluetooth 5.0, BLE |
| LoRaWAN | Supports Class A, C |
| Input Voltage | DC 5V – 3A |
| Interfaces | USB Type-C (Power Supply) * 1
Ethernet RJ45 * 1 RP-SMA Female Antenna Connector* 1 |
| Operating Temperature | 0°C to 50°C |
| Relative Humidity | 0% – 90% (non-condensing) |
| Heat Dissipation | Aluminum enclosure, a heatsink, and a cooling fan |
| IP Grade | IP20 |
| Certification | FCC / CE |
Bhim –
I ordered April batch and its arrived in next day of shipping. 100% satisfied with HHS.
Mark –
A nice little device with enough cooling. Connections are all on the same side. Works like a charm.
Confi –
Nice and good miner. Easy to manage with the possibility to see details via a cloud dashboard.
This has been my third order via HeliumHotShop, the site has good and correct stock dispayed with pretty fast delivery, also the after-sales support which a friend had to use for a return after ordering the wrong cable was good.
Mark J. –
I’ve also ordered the April batch and it arrived right on time, excellent delivery service.
The Sensecap M1 is definitely one of the better Helium Miners and has a good app support (although not necessarily needed). Especially Sensecap’s Discord channel is worth a visit once you bought the product.
My next miner will be a Sensecap again, most probably from HeliumHotShop.