COTX X3 Reseller: How to Find an Official One
A COTX X3 reseller is only worth using if it can prove it buys from the manufacturer or from an authorized distributor. The X3 is a LoRaWAN hotspot built for the Helium network, and because it sold well, gray-market sellers and outright fakes appeared quickly. This guide explains how to tell them apart.
What the COTX X3 actually is
The X3 is an indoor Helium hotspot with a built-in antenna and an Ethernet port. Most European units are sold in the EU868 frequency band, which is the legal band for LoRa in the EU. A US915 unit will not work properly on a European network and may break local radio rules.
Typical specs worth checking on any listing: Wi-Fi and Ethernet connectivity, a LoRa gateway chip with 8 channels, and a power draw of around 5 to 8 W. Our overview of the COTX X3 helium hotspot miner covers the V1.2 EU868 version in more detail.
How to recognise an official COTX X3 reseller
Start with the paperwork. A real reseller can name its supplier, show an invoice trail and tell you which batch your unit comes from. If it dodges those questions, walk away.
- The manufacturer's own site or social channels list the seller as an authorized partner.
- The listing states the frequency plan (EU868) and the hardware version (V1.2 or later).
- The seller gives a written warranty, usually 12 months.
- Payment goes through a method with buyer protection, not a bank transfer to a private account.
Be wary of any seller who only exists on a marketplace with no history. A shop that has been trading for years and answers technical questions in detail is a far safer bet.
Prices you can expect
Prices moved a lot since the 2021 boom. At launch, units sold for several hundred euros because supply was thin. Today a new X3 usually sits at around 100 to 200 EUR depending on stock and shipping, and a used one can go for less.
If an offer is far below that range, treat it as a red flag. Heavily discounted units are often refurbished, region-locked to the wrong band, or simply never arrive. A valid COTX X3 promo code can trim a few percent, but it will never turn a 150 EUR device into a 40 EUR one.
Checks to do once the unit arrives
Inspect the box first. Look for intact seals, a serial number on the label that matches the invoice, and the correct EU868 marking.
Then power it on and let it sync. Initial setup takes roughly 15 to 30 minutes, and the device should appear in the Helium app with a consistent name and location. If onboarding fails repeatedly, contact the seller within the return window, normally 14 days for EU consumer purchases.
Is it still worth buying an X3 in 2026?
Honestly, mining returns are modest now. Many owners earn only a few cents to a couple of euros a month, and that depends on coverage, antenna placement and local demand. Buy it as a hobby or to support network coverage, not as an income plan.
If you want other options, compare the range of EU868 helium hotspots before deciding. Some alternatives offer better antennas or outdoor mounting for similar money.
Frequently Asked Questions
Is there only one official COTX X3 reseller?
No. A manufacturer can work with several authorized distributors across regions. What matters is that the seller can show it is listed as a partner and can provide an invoice and warranty.
Can I use a US915 X3 in Europe?
It is a bad idea. The hardware runs on the wrong frequency band for European networks, so coverage and rewards will suffer. Always choose the EU868 version when you live in the EU.
How can I tell if my X3 is a fake?
Compare the serial number and label with the invoice, check the firmware version in the app, and look at build quality. Loose plastic, missing certification marks or a failed onboarding are all warning signs.
How much does a COTX X3 cost now?
Expect roughly 100 to 200 EUR for a new unit in 2026, with used ones cheaper. Shipping and import duties can add around 10 to 20 EUR if the seller is outside the EU.