SenseCAP M1 LoRaWAN Indoor Hotspot (EU868) 8GB – In Stock!
454.50 396.65 Add to cart

SenseCAP M1 LoRaWAN Indoor Hotspot (EU868) 8GB – In Stock!


  • In stock
  • Max Qty : 100pcs
(4 customer reviews)

56 available - order before 15:00 shipped same day

Premium Worldwide shipping on all orders

  • 14 days easy returns *(hotspots excluded)
  • Order yours before 15:00 for same day dispatch
Guaranteed Safe Checkout

What is SenseCAP M1

SenseCAP M1 is a high-performing, ready-to-use LoRaWAN indoor gateway compatible with Helium LongFi Network. SenseCAP M1 can connect to  The People’s Network within a few simple steps in minutes, and helps you build LoRa applications with low costs. SenseCAP M1 provides miles of wireless network coverage and data transmission capacity for LoRa/LoRaWAN devices. It helps you join and contribute to the infrastructure of The People’s Network while enjoying the benefits from the Helium community.



  • Handy Setup to Helium Network. 6 steps, 5 minutes, ready to go.

  • Powered by Mature Hardware Solutions. Raspberry Pi 4(2G/4G/8G RAM) and WM1302/WM1303 (Semtech SX1302/SX1303) baseband LoRa chip.

  • Secured and Reliable. Built-in ECC608 crypto chip, high-security authentication, and reliable connectivity.

  • Automatic Online Upgrades. Automatic OTA upgrades, without manual operation.

  • Remote Diagnosis. Built-in remote diagnostics mechanism, efficient online support.

  • 64GB Large Storage. 64GB MicroSD card large storage, extending the lifetime of the gateway, fulfilling the memory requirement of potential upgrade.

  • Efficient Cooling Solution. Aluminum enclosure with a heatsink and cooling fan inside, ensuring long-term and stable operation.

  • Multiple Accessories. Fiberglass antenna, slider pad for sliding rod installation, and upcoming outdoor enclosure, etc.

  • FCC and CE Certificated. Available for personal and commercial use.


SenseCAP M1 Orders are designated as Non-Cancellable/Non-Returnable (“NCNR”), except for the quality problems. You need to contact us to review the problem if you want to return.



Processor Raspberry Pi 4 (Broadcom BCM2711, Quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz)
Storage 64GB MicroSD Card
Frequency EU868 Version: 863MHz ~ 870MHz
Sensitivity -125dBm @125KHz/SF7
-139dBm @125KHz/SF12
TX Power Up to 26 dBm
Antenna Gain EU868: 2.8 dBi
Antenna Impedance 50 Ohm
Antenna Radiation Pattern Omni-Directional
Wi-Fi 2.4 GHz and 5.0 GHz IEEE 802.11ac wireless
Bluetooth Bluetooth 5.0, BLE
LoRaWAN Supports Class A, C
Input Voltage DC 5V – 3A
Interfaces USB Type-C (Power Supply) * 1

Ethernet RJ45 * 1

RP-SMA Female Antenna Connector* 1

Operating Temperature 0°C to 50°C
Relative Humidity 0% – 90% (non-condensing)
Heat Dissipation Aluminum enclosure, a heatsink, and a cooling fan
IP Grade IP20
Certification FCC / CE

4 reviews for SenseCAP M1 LoRaWAN Indoor Hotspot (EU868) 8GB – In Stock!

  1. Bhim

    I ordered April batch and its arrived in next day of shipping. 100% satisfied with HHS.

  2. Mark

    A nice little device with enough cooling. Connections are all on the same side. Works like a charm.

  3. Confi

    Nice and good miner. Easy to manage with the possibility to see details via a cloud dashboard.
    This has been my third order via HeliumHotShop, the site has good and correct stock dispayed with pretty fast delivery, also the after-sales support which a friend had to use for a return after ordering the wrong cable was good.

  4. Mark J.

    I’ve also ordered the April batch and it arrived right on time, excellent delivery service.

    The Sensecap M1 is definitely one of the better Helium Miners and has a good app support (although not necessarily needed). Especially Sensecap’s Discord channel is worth a visit once you bought the product.

    My next miner will be a Sensecap again, most probably from HeliumHotShop.

Add a review

Your email address will not be published.